> Daniel wrote:
>> Ph@Boy wrote:
>>> You need to check the height of the vehicle on level ground, usually
>>> measured from the bottom of the rocker panels, to the factory
>>> specification. That is the most common check of spring wear.
>> ==
>> What would you deem acceptable sag dimension?
>>
> The manufacturer usually sets a specification of "within limits", each
> model vehicle is usually different. You have to know what the factory
> setup spec is, to even know how much "sag" you have now. Most springs
> are not that expensive to purchase. You must replace in pairs. The
> additional labor required is minimal when you have the car apart for
> strut replacement alone.
>

Just checked my factory manual for my Integra. There is no height specification given.

Just checked a number of other Honda manuals I have. No height given in any of them. I wonder why?

-- Tegger